Voodoo-lab System Mix Plus Bedienungsanleitung PDF herunterladen (Seite 16)

DIGITAL MUSIC CORPORATION

3. The stereo outputs of the effects are brought back to the mixer

to be blended with the original preamp tone. For FX 1 and 2, we

will use In 2 and In 3 of Mix 1. These effects will be blended in

parallel with the original preamp tone.

4. Next, the two stereo Mix 1 Outs are used to drive four different GCX loops (Left and Right for

two devices). The sends of the loops are connected to the appropriate inputs on FX 3 and 4,

allowing them to be muted by the GCX. The Mix 1 signal is sent to Mix 2 via the internal

connection and the stereo outputs of FX 3 and 4 are brought back to the mixer (In 2 and In 3

of Mix 2) to be blended with it.

5. Mix 2 Outs are connected to the power amp input or the

amp effect return.

6. Additionally, you can connect the

rear panel Direct Outs, or the front panel

Balanced Outs to a mixing console or

recorder. Be sure the Cabinet Simulator

is on.

In this example, the Mix 1 knob controls the level of the preamp and FX 1 and 2. The Mix 2

knob controls the level of the entire mix. Please refer to Section 3.3 to correctly set levels.

1 2 ... 11 12 13 14 15 16 17 18 19

Keine Kommentare

Voodoo-lab System Mix Plus Bedienungsanleitung Seite 16